The CM91 was still not idling properly. I replaced the points and condenser, and also tore into the carb again. I’ve reset the float height,

The semi-automatic clutch was not disengaging during shifts. Upon disassembly, I discovered that the posts were frozen to the basket. The clutch was still able

The rubber that holds the mirrors in place has long since rotted. I scraped out the remains and cleaned up the housing. Using black silicone

When replacing the fork, I discovered that the headlight housing was broken at the top. Most of the force that holds the headlight in rests

I was finally able to source a new front fork from David Silver Spares. I did some light filler work and painted it red to

The pins on the ignition cylinder had been removed by a previous owner, so that any key would work. While this worked fine for turning